Home Lab Setup
I realized early on that people like building home labs for various reasons – simulation, education, certifications, testing, or some crazier stuff. I have always endorsed the idea of ’learning by example’. My passion for technology and experimentation has led me in setting up a personal lab at home. It lets you test things and play around in ways that might get you tossed out if you tried them in production environment. I have been testing various solutions in my lab gear before implementing it in customer production environment. Recently I was working for a Canadian carrier for their 3g/4g network service assurance systems. I successfully simulated the service assurance stack in my Home lab before writing a solution for the production environment.
My home lab is my dream network, except the budget consideration there are no constraints on imagination, you don’t just work for IT you live in IT.
Lab vSphere Hosts
The following hosts are used for simulation, lab testing and validation:
- Saraswati: Dell 2950 , Dual CPU Xeon 32 GB RAM
- GangaL Dell 1950 , Dual CPU Xeon 32 GB RAM
- Jamnuna: Dell 1950 , Dual CPU Xeon 32 GB RAM
- Godavari: Assembled , Single CPU Xeon , 16 Gb RAM
- Kaveri: Assembled , Inter Dual Core CPU , 16 Gb RAM
- Dell and HP Laptops : i5 CPU with 8 GB RAM
- Juniper 2320 Router
- Cisco 7204 Router
- Cisco 2500 Router
- Cisco 2950 Layer 2 switch
- Nortel Switch ( Non managed)
- Dlink Wireless Router ,Dual Antenna
Storage : Open filer and Starwind
MPLS Network Device Simulation: Cisco VIRL
- UPS 3500 VA
- Samsung Split AC 1.5 ton
- Internet Connection 50 mbps
- I have setup my Lab in my Study room cum Small Office Home Office , a space which I share with my Wife, obviously the first step towards LAB building was approval from family members.
- With all the servers and network equipment running, noise generated by these equipment’s may be annoying and irritating and one may feeling like wearing earplugs. I am used to the constant background drone, since I have been working in Telecom Switching room/ Server room/ Wireless base station however for others (like my wife) it’s a patience test.
- So I decided to conceal the my Study room making it sound proof to some extent and installed a 1.5 ton Split AC unit which helped me in keeping the equipment’s and the mind cool.
- I created a physical infrastructure to run the servers and networking equipment’s.
- The first task was to get an uninterrupted power supply system for my gear.
- I live in the city of Bangalore , which unfortunately is reeling under severe power cuts lasting from as little as 2 seconds to all night sometimes. My home lab required clean, uninterrupted, spike and transient free power supply. Providing power supply which was the first challenge before me.
- I decided to install UPS System and chose a UPS with a capacity 30 higher that overall consumption of my Lab gear. With the redundant power supply on my Dell Servers and Routers I connected one power supply to raw power and redundant power supply to UPS system.
- It’s the Sukam Fusion 3.5KVA Online UPS which powers my Home Lab.
- I ordered my Server/Networking rack from AMS Nettech. They customized the Rack as per my requirement. Mounting the networking equipment’s on the Rack was pretty simple , fix the cage nuts, tighten the screws , you are good to go. Next task was Ethernet cabling. While working at Service provider I was trained in Ethernet cabling and the Optical splicing, so I was good at crimping job and tailored the Ethernet cables to my requirements.